Sujitaro Manual
1. Simple Scenario
2. Line Information
3. Station Information
4. Train Information
5. Time on Timetable
6. Train Info CSV Import
7. Timetable and Diagram Display
8. Train Addition on Diagram
9. Time on Diagram
10. Automatic Train Addition
11. Analysis Feature
12. Split/Merge Feature
13. Car Management
14. Train Operation Display
15. OuDia Data Support
10. Automatic Train Addition

This feature is to add trains automatically using time to run information.

When you modify the setting, you will use the following two menu items.

[Setting]-[Automatic Train Addition]-[Line]

[Setting]-[Automatic Train Addition]-[Train]

Line dialog box, which is activated by [Setting]-[Automatic Train Addition]-[Line], is for settings related to line. You can modify facility settings, such as Single / Double, Siding Possible, and Exchange Possible.

Setting for Line

Train dialog box, which is activated by [Setting]-[Automatic Train Addition]-[Train], is for settings related to train. You can add time to run and stop time by inputting numbers. When you don't want seconds, input numbers only. When you want seconds as well, input [-] between minutes and seconds. For example, [12] means 12 minutes, [12-15] means 12M15S. If there is a passage station, select all stations from the previous stop and the next stop of a passed section, and press <Passage> button.

Setting for Train

You can add a train on the diagram using those settings. Select [Edit]-[Diagram]-[Automatic Train Addition] to activate automatic train addition. When you add a train on the diagram, the times are calculated based on automatic train addition setting, considering times to run and stop times.